Turbine Flow Meters with Female Inch Threads (HM-R)

Turbine Flow Meters for the precise measurement of instantaneous flow rates
and flow quantities of low-viscosity fluids as tap and demineralised water, fuels,
liquefied gases, solvents, light fuel oil and pharmaceutical fluids.

HM…R turbines have inch sized female threads allowing a great variety of connections.

Specification:

  • Measuring range: 0.03 bis 400 l/min
  • Viskosity: 0.1 up to 100 mm²/s
  • Linearity: ±0.5 % of actual value
  • Pressure: bis 630 bar
  • Fluid temperature: –273 bis +350 °C

Advantages:

  • Fast respone time and high resolution
    The turbinewheel’s low moment of inertia allows a fast acceleration
    from standstill up to full number of revolutions within 5 to 50 msec.
    For that reason dynamic measurements can be done. The resolultion
    can amount to as much as 139,000 pulses per litre.
  • Wide temperature range from –273 up to +350 °C
    Standard turbine flow meters:
    20 up to +120 °C
    Special models for cryogenic liquids:
    273 °C
    Special models with high temperature pickups:
    up to +350 °C
  • Low contamination risk:
    The spacing of the turbinewheel and bearing mount is wide enough to
    protect against particles in fluid jamming the turbinewheel. Furthermore
    the twist of flow in this area has a self-cleaning effect for the bearing.
    Here you can find our Pickups and Amplifiers as well as our Evaluation Electronics.

Downloads